Coyote CSSB-NG Betriebsanleitung Seite 9

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 23
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 8
7
control valves on the unit to the HIGH”position for about 20 seconds to allow the air in the system to
purge before attempting to light the burners.
LP Gas Supply Cylinder Disconnection
1. Turn the burner valves off.
2. Turn the tank valve off. (Turn clockwise to stop).
3. Detach the regulator assembly from the tank valve by turning the quick coupling nut
counterclockwise.
LP Tank Removal, Transport and Storage
- Turn OFF all control knobs and LP tank valve. Turn coupling nut counterclockwise by hand only - do
not use tools to disconnect. Lift LP tank wire upward off of LP tank collar, then lift LP tank up and off
of support bracket. Install safety cap onto LP tank valve. Always use cap and strap supplied with
valve. Failure to use safety cap as directed may result in serious personal injury and/or property
damage.
- A disconnected LP tank in storage or being transported must
have a safety cap installed (as shown). Do not store an LP
tank in enclosed spaces such as a carport, garage, porch,
covered patio or other building. Never leave a LP tank inside
a vehicle which may become overheated by the sun.
- Do not store LP tank in an area where children play.
LP Tank Filling
- Use only licensed and experienced dealers.
- LP dealer must purged tank before filling.
- Dealer should NEVER fill LP tank more than 80% of LP tank volume. Volume of propane in tank will
vary by temperature.
- A frosty regulator indicates gas overfill. Immediately close LP tank valve and call local LP gas dealer
for assistance.
- Do not release liquid propane (LP) gas into the atmosphere. This is a hazardous practice.
- To remove gas from LP tank, contact an LP dealer or call a local fire department for assistance.
Check the telephone directory under “Gas companies”for nearest certified LP dealers.
LP Tank Exchange
- Exchange your Type 1 cylinder with OPD safety feature-equipped ONLY.
- Always keep new and exchanged LP tanks in upright position during use, transit or storage. Leak
test new and exchanged LP tanks BEFORE connecting to burner.
WARNING: Always take a leak test before lighting the side burner to prevent a possible fire or
explosion. Never store a spare propane cylinder in the vicinity of this side burner, or in the vicinity of
any
Seitenansicht 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

Kommentare zu diesen Handbüchern

Keine Kommentare